Afriso fuel oil de-aerator FloCo-Top-2KM Si

SKU: 116308325

GTIN: 4016203701107

Category: Oil filters and oil breathers

Available immediately
Delivery time: 1 - 7 days (DE - int. shipments may differ)

121,25 €

incl. 19% VAT , plus (Paket)

Description

The Afriso FloCo-Top-2KM Si fuel oil deaerator for single-line systems with return supply in oil-fired systems has been designed for continuous de-aeration. It is suitable for the following media: fuel oil EL (DIN 51603-1) and diesel fuel (EN 590) as well as bio fuel oil (EN 14213) and bio diesel (EN 14214) with max. 20% FAME. It can also be used in areas liable to flooding.
Multiple filtration is recommended for burners with an oil consumption of< 20 l/h, while larger systems should be operated by single filtration. The automatic fuel oil de-aerator in safety version is equipped with an integrated filter, a stop-cock and vacuum pressure gauge. The housing is fitted with a changeover valve for multiple filtration as well as non-return valve with integrated pressure relief towards the tank. The de-aerator hood is equipped with a triple-float safety system to prevent oil foam from escaping through the ventilation hole.
For venting, the return oil is guided via the float chamber, and can then be added directly to the flow, or it can be filtered again by switching a valve. In case of multiple filtration, the return oil is responsible for an increased flow rate so that the filter cup is permanently filled with vented oil.
During service, the vacuum pressure gauge indicates the pump vacuum. When the stop cock is closed, the suction capacity of the burner pump can be checked. An increased negative pressure provides information on the pollution of the filter.
The drain unit ensures that replacing the filter is easy and clean:
Connect the hose, open the drain valve, loosen the union nut of the filter cup, and drain the oil in a controlled way. When the burner hose needs to be replaced, a bypass valve has to be opened additionally so that the oil is drained from the float chamber into the filter cup and via the drain unit.
The fuel oil deaerator is water-tight up to a water column of 10 metres, and has an operating pressure of maximum 0.7 bar, which equals a static oil column of approx. 8 metres.
The test pressure is 6 bar.

:	G3/8" mit Konus 60 °
:	0,7
:	max. 100 l/h
:	Senkrecht nach oben